LG 55XS2E Owners Manual - Page 83

Check Screen] Command: t z, Speaker] Command: d v, Daylight Saving Time] Command: s d

Get LG 55XS2E PDF manuals and user guides View all LG 55XS2E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Data 10 (Check Screen) Data1 00: C heck Screen result NG 07: C heck Screen result OK * Sets to NG when Check Screen is set to Off or not supported. Data Data1 Data2 13(For checking Door State) Number of the door to check 00: Closed 01: Opened Data 15 (when checking the current electric current value) Data1 Current electric current value in mA Data 16(For checking Humidity) Data1 Display the current humidity (%RH) in the Hex value Data 17(For checking Illuminance) Data1 Display the current illumination (Lux) in the Hex value Data Data1 18(For checking the Rotation (Gyro) State) 00: 0 degrees 01: 90 degrees 02: 180 degrees 03: 270 degrees Data 09 (In the case of Fan Speed) Acknowledgement (v)( )(Set ID)( )(OK/NG)(Data)(Data1)(Data2)(x) Data1 00-ff: The upper 1-byte of the fan speed Data2 00-ff: The lower 1-byte of the fan speed Fan speed: 0 to 2008 in hexadecimal and 0 to 8200 in decimal * This may not be supported on some models. 52. [Check Screen] (Command: t z) Sets Check Screen. Transmission (t)(z)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (z)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 55 53. [Speaker] (Command: d v) Sets the speaker function. Transmission (d)(v)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (v)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 54. [Daylight Saving Time] (Command: s d) To set the Daylight Saving Time function. Transmission (s)(d)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )(Data4) ( )(Data5)(Cr) Data 00: Off (Data2~5: FFH) 01: Start Time 02: End Time Data2 01~0C: January to December Data3 01~06: 1~6th week * The maximum number of [Data3] differs depending on Date. Data4 00~06 ( Sun. ~ Sat. ) Data5 00~17: 00~23 hours * To read the Start Time/End Time, enter FFH for [Data2]~[Data5]. (Example 1: sd 01 01 ff ff ff ff - To check the Start Time) (Example 2: sd 01 02 ff ff ff ff - To check the End Time) * This function is supported only when 1 (Year/Month/ Day) and 2 (Hour/ Minute/Second) are set. Acknowledgement (d)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4) (Data5)(x) * It may not be supported depending on the model. ENGLISH_index

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
ENGLISH
55
Data
10 (Check Screen)
Data1
00: Check Screen result NG
07: Check Screen result OK
* Sets to NG when Check Screen is set to Off or not supported.
Data
13(For checking Door State)
Data1
Number of the door to check
Data2
00: Closed
01: Opened
Data
15 (when checking the current electric current value)
Data1
Current electric current value in mA
Data
16(For checking Humidity)
Data1
Display the current humidity (%RH) in the Hex value
Data
17(For checking Illuminance)
Data1
Display the current illumination (Lux) in the Hex value
Data
18(For checking the Rotation (Gyro) State)
Data1
00: 0 degrees
01: 90 degrees
02: 180 degrees
03: 270 degrees
Data
09 (In the case of Fan Speed)
Acknowledgement
(v)( )(Set ID)( )(OK/NG)(Data)(Data1)(Data2)(x)
Data1
00-ff: The upper 1-byte of the fan speed
Data2
00-ff: The lower 1-byte of the fan speed
Fan speed: 0 to 2008 in hexadecimal and 0 to 8200 in decimal
* This may not be supported on some models.
52.
[Check Screen] (Command: t z)
Sets Check Screen.
Transmission
(t)(z)( )(Set ID)( )(Data)(Cr)
Data
00: Off
01: On
Acknowledgement
(z)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
53.
[Speaker] (Command: d v)
Sets the speaker function.
Transmission
(d)(v)( )(Set ID)( )(Data)(Cr)
Data
00: Off
01: On
Acknowledgement
(v)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
54.
[Daylight Saving Time] (Command: s d)
To set the Daylight Saving Time function.
Transmission
(s)(d)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )(Data4)
( )(Data5)(Cr)
Data
00: Off (Data2~5: FFH)
01: Start Time
02: End Time
Data2
01~0C: January to December
Data3
01~06: 1~6th week
* The maximum number of [Data3] differs depending on Date.
Data4
00~06 ( Sun. ~ Sat. )
Data5
00~17: 00~23 hours
* To read the Start Time/End Time, enter FFH for [Data2]~[Data5].
(Example 1: sd 01 01 ff ff ff ff - To check the Start Time)
(Example 2: sd 01 02 ff ff ff ff - To check the End Time)
* This function is supported only when 1 (Year/Month/ Day) and 2 (Hour/
Minute/Second) are set.
Acknowledgement
(d)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4)
(Data5)(x)
* It may not be supported depending on the model.