LG 55XS2E Owners Manual - Page 91

Luminance Value Read] Command: m u, Fan Failure Check] Command: d w

Get LG 55XS2E PDF manuals and user guides View all LG 55XS2E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

88. [Dual Screen Off] (Command: s n, 92) Turn Dual Screen On or Off. Transmission (s)(n)( )(Set ID)( )(9)(2)( )(Data)(Cr) Data 00: M ainScreen - On / SubScreen - On 01: M ainScreen - Off / SubScreen - On 02: M ainScreen - On / SubScreen - Off Acknowledgement (n)( )(Set ID)( )(OK/NG)(9)(2)(Data)(x) * This feature may not be supported in certain models. 89. [Fan control] (Command: d o) Sets the fan mode. Transmission (d)(o)( )(Set ID)( )(Data)(Cr) Data 00: Auto 01: On 02: Manual 03: Off Acknowledgement (o)( )(Set ID)( )(OK/NG)(Data)(x) * This may not be supported on some models. 90. [Fan Failure Check] (Command: d w) Checks for fan failures. Transmission (d)(w)( )(Set ID)( )(Data)(Cr) Data FF: Read status Acknowledgement (w)( )(Set ID)( )(OK/NG)(Data1)(Data2)(x) Data1 Data2 00: O ne or more fans are faulty. 01: A ll fans are normal. 02: The model has no fan. 00: N o fan is faulty (all fans are normal). 01: 1 fan is faulty. 02: 2 fans are faulty. 03: 3 fans are faulty. 04: 4 fans are faulty. 05: 5 fans are faulty. 06: 6 fans are faulty. 07: 7 fans are faulty. 08: 8 fans are faulty. 09: 9 fans are faulty. 0A: 1 0 fans are faulty. ... N: N down 63 91. [Luminance Value Read] (Command: m u) Reads luminance value. Transmission (m)(u)( )(Set ID)( )(FF)(Cr) Acknowledgement (u)()(SetID)()(OK/NG)(Data1)(Data2)(Data3) (Data4)(Data5)(Data6)(Data7)(x) Data1 00-64: The Backlight PWM value (0 to 100) Data2 00-ff: The upper 1-byte of the value measured by the CA210. Data3 00-ff: The lower 1-byte of the value measured by the CA210. CA210 measurement: 0 000 to ffff in hexadecimal and 0 to 65535 in decimal. Data4 00-ff: The upper 1-byte of the value measured by BLU 1 sensor. Data5 00-ff: The lower 1-byte of the value measured by BLU 1 sensor. Data6 00-ff: The upper 1-byte of the value measured by BLU 2 sensor. Data7 00-ff: The lower 1-byte of the value measured by BLU 2 sensor. BLU measurement: 0 000 to ffff in hexadecimal and 0 to 65535 in decimal. * During final assembly, a CA210 measurement is entered through the calibration procedure. The default value, before calibration, is 0. * This may not be supported on some models. 92. [BLU Maintenance] (Command: m t) Selects whether to turn on/off BLU Maintenance. Transmission (m)(t)( )(Set ID)( )(Data)(Cr) Data 00: BLU Maintenance Off 01: BLU Maintenance On Acknowledgement (t)( )(Set ID)( )(OK/NG)(Data)(x) * This may not be supported on some models. ENGLISH_index

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
ENGLISH
63
88.
[Dual Screen Off] (Command: s n, 92)
Turn Dual Screen On or Off.
Transmission
(s)(n)( )(Set ID)( )(9)(2)( )(Data)(Cr)
Data
00: MainScreen – On / SubScreen – On
01: MainScreen – Off / SubScreen – On
02: MainScreen – On / SubScreen – Off
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(9)(2)(Data)(x)
* This feature may not be supported in certain models.
89.
[Fan control] (Command: d o)
Sets the fan mode.
Transmission
(d)(o)( )(Set ID)( )(Data)(Cr)
Data
00: Auto
01: On
02: Manual
03: Off
Acknowledgement
(o)( )(Set ID)( )(OK/NG)(Data)(x)
* This may not be supported on some models.
90.
[Fan Failure Check] (Command: d w)
Checks for fan failures.
Transmission
(d)(w)( )(Set ID)( )(Data)(Cr)
Data
FF: Read status
Acknowledgement
(w)( )(Set ID)( )(OK/NG)(Data1)(Data2)(x)
Data1
00: One or more fans are faulty.
01: All fans are normal.
02: The model has no fan.
Data2
00: No fan is faulty (all fans are normal).
01: 1 fan is faulty.
02: 2 fans are faulty.
03: 3 fans are faulty.
04: 4 fans are faulty.
05: 5 fans are faulty.
06: 6 fans are faulty.
07: 7 fans are faulty.
08: 8 fans are faulty.
09: 9 fans are faulty.
0A: 10 fans are faulty.
…
N: N down
91.
[Luminance Value Read] (Command: m u)
Reads luminance value.
Transmission
(m)(u)( )(Set ID)( )(FF)(Cr)
Acknowledgement
(u)()(SetID)()(OK/NG)(Data1)(Data2)(Data3)
(Data4)(Data5)(Data6)(Data7)(x)
Data1
00–64: The Backlight PWM value (0 to 100)
Data2
00–ff: The upper 1-byte of the value measured by the
CA210.
Data3
00–ff: The lower 1-byte of the value measured by the
CA210.
CA210 measurement:
0000
to ffff in hexadecimal and 0 to
65535
in decimal.
Data4
00–ff: The upper 1-byte of the value measured by BLU 1
sensor.
Data5
00–ff: The lower 1-byte of the value measured by BLU 1
sensor.
Data6
00–ff: The upper 1-byte of the value measured by BLU 2
sensor.
Data7
00–ff: The lower 1-byte of the value measured by BLU 2
sensor.
BLU measurement:
0000
to ffff in hexadecimal and 0 to
65535
in decimal.
* During final assembly, a CA210 measurement is entered through the
calibration procedure. The default value, before calibration, is 0.
* This may not be supported on some models.
92.
[BLU Maintenance] (Command: m t)
Selects whether to turn on/off BLU Maintenance.
Transmission
(m)(t)( )(Set ID)( )(Data)(Cr)
Data
00: BLU Maintenance Off
01: BLU Maintenance On
Acknowledgement
(t)( )(Set ID)( )(OK/NG)(Data)(x)
* This may not be supported on some models.