LG A927KGMS Owners Manual - Page 12

us_main.book.book Page 12 Tuesday, March 31, 2020 5:28 PM 12 INSTALLATION Installing the Charging Station WARNING • To prevent tipping, self-standing mode installations should be anchored to the wall using the provided stand anchoring screw, anchoring block and double-sided tape. CAUTION • Keep fingers away from pinch points when assembling the appliance or the charging station. CAUTION • Do not allow children or pets to hang onto the charging station. They could be injured or cause damage to the appliance. • Take care not to drop the product parts while unpacking them to avoid appliance damage or personal injury. • Do not use double-sided tape to attach the charging station to wallpaper. The weight of the charging station and the product body could damage the paper. • Use the stand anchoring screw on concrete or solid walls. If the appliance is not anchored securely and falls, it could result in damage to property or the product. NOTE • The charging station can be removed as needed. To remove it, hold the floor stand dock steady and pull up on the charging station. NOTE • Once assembled, the floor stand dock and the floor stand pipe cannot be disassembled. • The cost of a service call to install or reinstall the charging station is not covered under the warranty. Self-Standing Installation Follow the steps below to install the charging station on a hard and level floor. 1 Place the floor stand dock on a hard and level floor and assemble the floor stand pipe. 2 Clip the power cord tidily into the cord keeper a on the back of the floor stand pipe.