LG DLG4802W Owner's Manual - Page 10
Control panel features - dryer manual
View all LG DLG4802W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 PARTS AND FEATURES Control panel features Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for more detailed information. wWARNING: To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety Instructions, before operating this dryer. F D A G E A POWER ON/OFF BUTTON Press to turn the dryer ON. Press again to turn the dryer OFF. NOTE Pressing the ON/OFF button during a cycle will cancel that cycle and any load settings will be lost. B CYCLES BUTTON Press this button to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. On MANUAL DRY cycles, these settings can be adjusted using the cycle setting buttons anytime before starting the cycle. C START/PAUSE BUTTON Press this button to START the selected cycle. If the dryer is running, use this button to PAUSE the cycle without losing the current settings. NOTE If you do not press the START/PAUSE button to resume a cycle within 4 minutes, the dryer turns off automatically. D MORE TIME/LESS TIME BUTTONS To adjust the drying time, use these buttons with MANUAL DRY, TIME DRY cycles. Press the MORE TIME button to increase the selected manual cycle time by a minute; press LESS TIME to decrease the cycle time by a minute. H B C E CYCLE SETTING BUTTONS Use these buttons to select the desired cycle settings for the selected cycle. The current settings are shown in the display. Press the button for that option to view and select other settings. F TIME AND STATUS DISPLAY The display shows the settings, estimated time remaining, options, and status messages for your dryer. G OPTION BUTTONS The OPTION buttons allow you to select additional cycle options. Not all settings are available for all cycles. Refer to the CYCLE GUIDE section of the manual. H SIGNAL BUTTON Press the SIGNAL button repeatedly to adjust the volume of the signals. This button is also used to activate and deactivate CHILD LOCK by pressing and holding the buttom for three seconds.