LG DLG5988WM Service Manual - Page 7
Stacking Kit Installation Instructions
View all LG DLG5988WM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Stacking Kit Installation Instructions To ensure safe and secure installation, please observe the instructions below. W ARNING Do not attempt installation with one person. Incorrect installation procedure can cause serious accidents and physical Injuries. 4 Secure stacking kit side bracket to the washer with a screw on the back of bracket. Repeat Steps 2, 3, 4 for the other side. The weight of the dryer and the height of installation makes the stacking procedure too risky for one person. This procedure should be performed by 2 or more experienced service personnel. 5 Place the dryer on top of the washer by fitting legs as shown in the picture. Avoid finger injuries - be careful not to pinch fingers between the washer and dryer. Slide washer slowly backwards to the stopper of kit. 1 Stacking kit Place washer firmly on a stable, even and solid floor as product installation instructions describes in owner's manual. 2 Peel protective paper off the tape from the stacking kit side bracket. 6 Insert the front stacking kit. Push the front stacking kit back to the stoppers of side stacking kit. 3 Fit the stacking kit side bracket firmly to the side of top plate by attaching the doublefaced tape to top plate as picture shows. 7 Screw both sides of the front kit. • Do not use stacking kit with a gas dryer in potentially unstable conditions like a mobile home. 7