LG DP889 Owner's Manual (English) - Page 18

Specifications, Troubleshooting - resolution

Page 18 highlights

DP392-N_AUSALLK_ENG 6/2/08 12:00 PM Page 18 Troubleshooting Symptom Cause Correction No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The battery is discharged. Recharge the battery. The power is on, but the unit does not work. No disc is inserted. The operation mode is not selected correctly. Insert a disc. Use MODE button to select the operation mode. (page 9) No picture. The TV is not set to receive the signal from the unit. Select the appropriate video input mode on the TV. The video cable is not connected Connect the video cable securely. securely. The LCD mode is set to [Off]. Select an LCD mode other than [Off]. No sound. The equipment connected with the Select the correct input mode of audio cable is not set to receive the audio amplifier. the signal from the unit. The volume is set to minimum. Use the volume controller to adjust the volume. The AUDIO options are set to the Set the AUDIO settings to the cor- wrong position. rect position. The unit does not An unplayable disc is inserted. start playback. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control does not work properly. The remote control is not pointed at the remote sensor on the unit. The remote control is too far from the unit. Point the remote control at the remote sensor of the unit. Operate the remote control closer to the unit. Specifications General Power requirements Power consumption External Dimensions Net Weight (Approx.) Operating temperature: Operating humidity Laser Signal system Internal Memory DC 12 V 12W 231 x 40.2 x 145 mm (W x H x D) 1.06 kg 5 °C to 40 °C 5 % to 90 % Semiconductor laser NTSC Flash Memory (256MB) Connectors Audio/Video Output/Input ø3.5mm mini jack x 1 - Video: 1.0 V (p-p), 75 Ω, sync negative - Audio (Analog): 2 Vrms (1 KHz, 0 dB) Earphone terminal ø3.5mm stereo mini jack x 2 Liquid Crystal Display Panel size 8 inches wide (diagonal) Projection system R.G.B. stripe Driving system TFT active matrix Resolution 800 x 480 (WVGA) Accessories • RCA Video/Audio cable • AC Adapter (MPA-630A) • Automotive Adapter (DPDC1) • Remote Control • Battery for Remote Control (Lithium Battery) Designs and specifications are subject to change without prior notice. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

18
Specifications
Troubleshooting
Symptom
Correction
The power cord is disconnected.
The battery is discharged.
No disc is inserted.
The operation mode is not select-
ed correctly.
The TV is not set to receive the
signal from the unit.
The video cable is not connected
securely.
The LCD mode is set to [Off].
The equipment connected with the
audio cable is not set to receive
the signal from the unit.
The volume is set to minimum.
The AUDIO options are set to the
wrong position.
An unplayable disc is inserted.
The rating level is set.
The remote control is not pointed
at the remote sensor on the unit.
The remote control is too far from
the unit.
Plug the power cord into the wall
outlet securely.
Recharge the battery.
Insert a disc.
Use MODE button to select the
operation mode. (page 9)
Select the appropriate video input
mode on the TV.
Connect the video cable securely.
Select an LCD mode other than
[Off].
Select the correct input mode of
the audio amplifier.
Use the volume controller to adjust
the volume.
Set the AUDIO settings to the cor-
rect position.
Insert a playable disc. (Check the
disc type and regional code.)
Change the rating level.
Point the remote control at the
remote sensor of the unit.
Operate the remote control closer
to the unit.
No power.
The power is on,
but the unit does
not work.
No picture.
No sound.
The unit does not
start playback.
The remote
control does not
work properly.
Designs and specifications are subject to change without
prior notice.
Cause
General
Power requirements
DC 12 V
Power consumption
12W
External Dimensions
231 x 40.2 x 145 mm (W x H x D)
Net Weight (Approx.)
1.06 kg
Operating temperature:
5 °C to 40 °C
Operating humidity
5 % to 90 %
Laser
Semiconductor laser
Signal system
NTSC
Internal Memory
Flash Memory (256MB)
Connectors
Audio/Video Output/Input
ø3.5mm mini jack x 1
- Video: 1.0 V (p-p), 75
Ω
, sync negative
- Audio (Analog): 2 Vrms (1 KHz, 0 dB)
Earphone terminal
ø3.5mm stereo mini jack x 2
Liquid Crystal Display
Panel size
8 inches wide (diagonal)
Projection system
R.G.B. stripe
Driving system
TFT active matrix
Resolution
800 x 480 (WVGA)
Accessories
RCA Video/Audio cable
AC Adapter (MPA-630A)
Automotive Adapter (DPDC1)
Remote Control
Battery for Remote Control (Lithium Battery)
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 18