LG DU-27FB34C Owner's Manual - Page 50
Detailed Descriptions for Installer Menu Items 76-I through 101-I
View all LG DU-27FB34C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Installer Menu Detailed Descriptions for Installer Menu Items 76-I through 101-I 76-I. DEFEAT XDS Set to 1 to disable XDS display. Set to 0 to enable XDS display. XDS data (provided at the discretion of the broadcaster), is available only on analog channels. After a channel change, wait 5 seconds then press ENTER to see XDS data, if available. 77-I. NOT USED 78-I. UPN MSB User programmable number, most significant byte readable by M.P.I. command. 79-I. UPN MSB-1 User programmable number, most significant byte-1 readable by M.P.I. Command. 80-I. UPN MSB-2 User programmable number, most significant byte-2 readable by M.P.I. command. 81-I. UPN LSB User programmable number, least significant byte readable by M.P.I. command. 82-I. CHKSM ERROR Enforces rigid M.P.I checksum validation. Set to 1 for validation. Set to 0 to turn off. 83-I. HANDSHK TIME Adds an additional delay to the handshake time which is 64 msec, thus relaxing M.P.I. timing requirements to be compatible with PC based Windows controlled systems, range is 0 - 5. Set to 0 to retain standard 64 msec delay. Set to 1 - 5 to increase @ 16 msec ea., the delay up to 144 msec. 84-I. PERMANENT BLK Allows Parental Control blocking schemes to be permanent by removing the blocking hours function. Set to 1 to install Parental Control blocking restrictions permanently. Set to 0 for user-specified hours control of blocking schemes. 85-I. A MUTE TIME Controls audio muting delay time when switching between AUX sources. Range is 0 to 254 msec. 86-I. V MUTE TIME Controls video muting delay time when switching between AUX sources. Range is 0 to 254 msec. 87-I. NOT USED 88-I. EN NOISE MUTE When set to 1, the audio signal volume is limited to a minimum value while receiving no signal from the broadcaster. 89-I. POKE ENABLE When set to 1, writing to Non-volatile Memory thru M.P.I. Is enabled. 90-I. KEY LOCK When set to 1, front keyboard functionality is disabled. When set to 0, keyboard is enabled. 91-I. NOT USED 92-I. NOT USED 93-I. NOT USED 94-I. NOT USED 95-I. AUDIO MD DISP When set to 1, Audio Mode Information is enabled to appear as part of the Channel-Time Display. 96-I. NOT USED 97-I. NOT USED 98-I. NOT USED. 99-I. NOT USED. 100-I. NOT USED. 101-I. NOT USED. Page 50