LG DU-60PY10 Owners Manual - Page 84

External Control Device Setup 19. Color Temperature (Command2:u) G To adjust color temperature. You can also adjust color temperature in the Video menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0: Cool 1: Medium 2: Warm Acknowledgement [u][ ][Set ID][ ][OK][Data][x] 20. PIP Input Select (Command2:y) G To select input source for sub picture in PIP/Twin pic- ture mode. Transmission [k][y][ ][Set ID][ ][Data][Cr] Data 0: Antenna 1: Cable 2: Video 3: Front Video Acknowledgement [y][ ][Set ID][ ][OK][Data][x] 21. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission [ j ][p][ ][Set ID][ ][Data][Cr] Data 0: Normal 1: Orbiter 2: Inversion Acknowledgement [p][ ][Set ID][ ][OK][Data][x] 22. White Wash (Command2:q) G To control the white wash function on/off. You can also adjust white wash in Option menu. Transmission [ j ][q][ ][Set ID][ ][Data][Cr] Data 0: White Wash off 1: White Wash on Acknowledgement [q][ ][Set ID][ ][OK][Data][x] 23. Orbiter Time Setting (Command2:r) G To adjust orbiter operation time term. Transmission [ j ][r][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: FE Acknowledgement [r][ ][Set ID][ ][OK][Data][x] 84 Plasma TV 24. Orbiter Pixel Setting (Command2:s) G To adjust pixel number in orbiter function. Transmission [ j ][s][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: A Acknowledgement [s][ ][Set ID][ ][OK][Data][x] 25. Tune Command (Command: m a) G To tune channel to following physical/major/minor number Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr] Data 0: Physical channel number Min: 1~ Max: 0x87 Data 1, Data 2: Major Channel Number (two part)/ Channel Number (One part) (Data 1: High, Data 2: Low) Data 3, Data 4: Minor Channel Number (Data3: High, Data4: Low) Data 5: 7 Main/Sub 6 Picture Two/One Part 5 4 Reserved Reserved 3 2 Channel 10 Step 0 Main 0 Two x x 0 0 0 0 NTSC Air 1 Sub 1 One x x 0 0 0 1 NTSC Cable x x 0 0 1 0 ATSC Air x x 0 01 1 ATSC Cable_std x x 0 10 0 ATSC Cable_hrc x x 0 10 1 ATSC Cable_irc x x 0 1 1 0 ATSC cable x x 0 1 1 1 Reserved x x ... x x 1 1 1 1 Reserved *All data are transmitted by Hexadecimal code Example) If you want PIP channel tuned to ATSC air (standard) 30-5, the command sequence is ma 00 1e 00 1e 00 05 82. Acknowledgement [a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][x] [a][ ][Set ID][ ][NG][Data0][x] 26. Channel Add/Del (Command: m b) G To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 0: Channel Delete 1: Channel Add Acknowledgement [b][ ][Set ID][ ][OK][Data][x] [b][ ][Set ID][ ][NG][Data][x] 27. Key (Command: m c) G To send IR remote key code Transmission [m][c][ ][Set ID][ ][Data][ ][Cr] Data Key code: Refer to page 86. Acknowledgement [c][ ][Set ID][ ][OK][Data][x]