LG HBM-800 User Manual - Page 3

Part Description Headset LED indicator(Blue) for Bluetooth status LED indicator(Red) for charging status Speaker Cradle Volume UP / Down Button Speaker LED indicator(Red) for charging status Small Charging Cradle Call Button Power Button Volume UP / Down Button Protective film MIC MFB (MultiFunction Button) Charging Port LED indicator(Blue) for Bluetooth status Charging Port * Small Charging Cradle is only used for charging the HBM-800 Headset. 4 How to use Headset Before Use - Before using the HBM-800 headset, you will need to remove the protective film which is covering the contacts on the headset. Charging - Attach the Headset to the Cradle. �The headset will always charge when attached to the cradle, even if both the headset and cradle are powered off. �If the cradle battery is empty, the headset will not charge (the LED indicator on the headset will not turn on, while in the cradle). - The LED indicator will show a solid red light. - It takes 2 hours to fully charge the Headset. - When charging is complete, the LED indicator will turn off. - The headset can also be charged using the Small Charging Cradle. First, connect the charger to the charging port on the Small Charging Cradle, then attach the HBM-800 headset. Low battery - A low battery tone will play once every 30 seconds. Recharge the battery when the low battery beep is heard. - If the battery is not charged, the Headset will turn off. Power on - Press and Hold the PWR button for 3 seconds. �The power will turn on and a booting tone will play. Power off - Press and hold the PWR button for 4 seconds. �A shutdown tone will play, the Bluetooth link will disconnect, and the power will turn off. Pairing - Prior to using the Headset for the first time, you must pair it with a Bluetooth-enabled handset. - There are 2 Pairing Mode Methods with the HBM-800. 1) Easy Pairing � With the Power off, press and hold the PWR button for 3 seconds, to turn on the HBM-800. � The Headset will enter Auto-Reconnect mode, for 10 seconds (If your Headset has been previously paired to the handset, the Headset will automatically reconnect to the handset, when the HBM-800 is powered on.) 5