LG HBM-800 User Manual - Page 4

How to use Headset � After 10 seconds, the HBM-800 will automatically enter Paring Mode. � When the headset enters Pairing Mode, the LED indicator will show a solid blue light. � Using your handset, find the Bluetooth Menu and "search for" or "add" new devices. � Select "LG HBM-800" from the list of devices and pair it with your handset. � When asked for the Pass/PIN code during the pairing procedure, please enter "0000" (4 Zeros). � Once pairing has completed successfully, you will hear a beep. � After pairing successfully, be sure to "Connect" to the LG HBM-800. � If you want to pair with a different device in the future, the Headset must be placed in Pairing Mode. � If the headset is in Pairing mode for three minutes without being connected to a handset, the HBM-800 will automatically turn off. 2) Manual Pairing � With the Power off, press and hold the PWR button for 5 seconds. � When the Headset enters Pairing Mode, the LED indicator will show a solid blue light. � Using your handset, find the Bluetooth Menu and "search for" or "add" new devices. � Select "LG HBM-800" from the list of devices and pair it with your Handset. � When asked for the Pass/Pin code during the pairing procedure, please enter "0000" (4 Zeros) � Once pairing has completed successfully, you will hear a beep. � After pairing successfully, be sure to "Connect" to the LG HBM-800. � If you want to pair with a different device in the future, the Headset must be placed in Pairing Mode. � If the headset is in Pairing mode for three minutes without being connected to a Handset, the HBM-800 will automatically turn off. Auto Reconnect - When the HBM - 800 turns off (accidentally or intentionally) while connected to a handset, the headset and handset will disconnect. The Headset and handset will automatically reconnect when the HBM800 is turned back on.(as long as both devices are within the required range of 33ft. or 10m) [ Out of range ] - When the HBM - 800 and your handset are separated by a distance of 33 feet (10 meters) or more, the Headset and handset will disconnect. 6 How to use Headset When the handset and HBM - 800 are brought back within the required distance, the HBM - 800 will automatically reconnect with the handset. - If the Headset and handset do not automatically reconnect when they are back within the required range, briefly press the CALL button on the HBM-800 to reconnect manually. Volume control - Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume. - You will hear an alert beep tone when the volume is at the maximum or minimum level. Calling Answering a call - When there is an incoming call, the Headset will ring. - Briefly press the CALL button to answer an incoming call. Making a call - If you make a call from the handset, the call will (subject to handset settings) automatically transfer to the Headset. If the call is not automatically transferred, you can manually transfer the call by briefly pressing the CALL button on the HBM - 800 (handset and headset must be paired). Voice dialing* - Briefly press the CALL button to activate "Voice Command". You will get the best results if you record the voice dialing tag through your Headset. NOTE: If the handset does not support Voice Dialing, it is possible that performing this action will activate Last Number redial. Last number redial* - Press and hold the CALL button for 1 second to activate "Last Number Redial". The Headset will beep, and call the last number dialed. Ending a call - Briefly press the CALL button. Transferring a call* - While on a call on your handset, briefly press the CALL button to transfer the audio to the Headset.(Headset and handset must be paired). - And to transfer a call from the Headset to handset, press and hold VOLUME UP button on the HBM-800 headset for 5 seconds. 7