LG KG280 Service Manual - Page 44
Checking Flow
View all LG KG280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
4. TROUBLE SHOOTING CHECKING FLOW For these 2 test case, No Call connection is needed Check SW600 Pin ANT,RF with RF Cable connected. Check SW600 Pin ANT,RF with No RF Cable Connected Check C630,C631 Check whether Ant SW Set as RX mode Refer to Table 4-1 Open Yes Short Yes VC1 :Low VC2 :Low Yes No Changing SW600 No Changing SW600 No Changing the Board. Check RF Level of FL600.1(for GSM850) FL600.3(for EGSM) Pin 1,3: ~-62dBm No FL600.5(for DCS) Pin 5,7: ~-63dBm FL600.7(for PCS) Yes Ant SW & Mobile SW is OK See next Page to check Rx IQ Signal Changing FL600 For this RF Level test case, RX Stand alone Mode is needed refer to Chapter 10 Copyright © 2007 LG Electronics. Inc. All right reserved. Only for training and service purposes - 45 - LGE Internal Use Only