LG LBC24360ST Service Manual - Page 8

Lamp, Multi Duct, Main Pwb - refrigerator model

Get LG LBC24360ST PDF manuals and user guides View all LG LBC24360ST manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

3-6 LAMP Unplug Refrigerator, or disconnect power at the circuit breaker. If necessary, remove top shelf or shelves. 3-6-1 Refrigerator Compartment Lamp 1) Unplug refrigerator power cord from electric outlet. 2) Put flat screwdriver into service hole and remove cover of refrigerator light. 3-7 MULTI DUCT 1. Remove the upper and lower Caps by using a flat screwdriver, and remove 2 screws. (Figure 3) 2. Disconnect the lead wire on the bottom position. 3) Remove the LED assembly from connector. 4) Replace the LED assembly. 3-8 MAIN PWB 1) Loosen 3 screws on the PWB cover. Figure 3 3-6-2 Freezer Compartment Lamp 1. Unplug refrigerator power cord form outlet. 2. Remove screw with driver. 3. Grasp the cover Lamp,pull the cover downward. 2) Remove the PWB cover 3) Disconnect wire harness and replace the main PWB in the reverse order of removal. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
3-6 LAMP
Unplug Refrigerator, or disconnect power at the circuit
breaker.
If necessary, remove top shelf or shelves.
1.
Unplug refrigerator power cord form outlet.
2.
Remove screw with driver.
3.
Grasp the cover Lamp,pull the cover downward.
3-6-2
Freezer Compartment Lamp
3-7
MULTI DUCT
1. Remove the upper and
lower Caps by using a
flat screwdriver, and
remove 2 screws.
(Figure 3)
2.
Disconnect the lead wire
on the bottom position.
Figure 3
3-8
MAIN PWB
1) Loosen 3 screws on the PWB cover.
2) Remove the PWB cover
3) Disconnect wire harness and replace the main PWB in
the reverse order of removal.
1) Unplug refrigerator power cord from electric outlet.
2) Put flat screwdriver into service hole and remove cover
of refrigerator light.
3-6-1
Refrigerator Compartment Lamp
4) Replace the LED assembly.
3) Remove the LED assembly from connector.
<Swing Model>
<Drawer Model>
8