LG LRDCS2603S Owners Manual - Page 19
Caution
![]() |
View all LG LRDCS2603S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH 3 Lift the door from the middle hinge pin and remove the door. CAUTION • Place the door, inside facing up, on a nonscratching surface. INSTALLATION 19 6 Use a ¼ in (6.35 mm) hex socket wrench to loosen the hinge pin and remove. Remove the two allen screw using 5 mm (3/16 in) , the phillip screw and the hinge . 4 Remove the four screws , the hinge pin insert and the hinge pin brackets from the bottom right side of the door. 7 With a flat-head screwdriver, carefully pry off and remove the cover over the bolt holes on the left side of the refrigerator. 8 Remove the outer lower decorative screw from the flange on the frame between the freezer and refrigerator doors (You will need this hole for the middle hinge bracket). 5 Reinstall the hinge pin brackets , screws and hinge pin insert on the bottom left side of the door. 9 Turn the middle hinge bracket upside down and position it on the left side of the refrigerator and reattach using two allen screw using 5 mm (3/16 in.) and a Phillip screw. 10 Reattach middle hinge pin using a ¼ in. (6.35 mm) socket wrench. NOTE • The bracket has been flipped, but the hinge pin stays in the same orientation with its hexagonal end facing upward.
![](/manual_guide/products/lg-lrdcs2603d-owners-manual-c845a5e/19.png)