LG LRDCS2603S Owners Manual - Page 35

Water Filter Replace

Get LG LRDCS2603S PDF manuals and user guides View all LG LRDCS2603S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

ENGLISH 3 Pull the water filter downward and turn it counterclockwise before pulling it out. Make sure to rotate the filter down completely before pulling it out of the manifold hole. MAINTENANCE 35 For further assistance, call: • 1-800-243-0000 (USA) • 1-888-542-2623 (Canada) 4 Replace with a new water filter. • Take the new water filter out of its packing and remove the protective cover from the orings. With the water filter tabs in the horizontal position, push the new water filter into the manifold hole and turn it clockwise until it stops. 5 Close the water filter cover. The cover will click when closed correctly. 6 After the water filter is replaced, dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system. NOTE • Do not dispense the entire 2.5 gallon amount continuously. Press and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. 7 After changing the filter, press and hold the Water Filter Replace button for three seconds to reset the indicator light.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
35
MAINTENANCE
ENGLISH
NOTE
• Do not dispense the entire 2.5 gallon amount
continuously. Press and release the dispenser
pad for cycles of 30 seconds ON and 60 seconds
OFF.
For further assistance, call:
• 1-800-243-0000 (USA)
• 1-888-542-2623 (Canada)
Pull the water filter downward and turn it
counterclockwise before pulling it out. Make
sure to rotate the filter down completely
before pulling it out of the manifold hole.
Replace with a new water filter.
• Take the new water filter out of its packing
and remove the protective cover from the
orings.
With the water filter tabs in the
horizontal position, push the new water
filter into the manifold hole and turn it
clockwise until it stops.
Close the water filter cover. The cover will click
when closed correctly.
After the water filter is replaced, dispense 2.5
gallons of water (flush for approximately 5
minutes) to remove trapped air and
contaminants from the system.
After changing the filter, press and hold the
Water Filter Replace
button for three
seconds to reset the indicator light.
3
4
5
6
7