LG LRFDS3006D Owners Manual - Page 15
Removing/Assembling the, Handles
View all LG LRFDS3006D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Removing/Assembling the Handles When moving the refrigerator through a narrow opening, removing the doors is preferred. The appearance of the handles may vary from what is shown. WARNING • When assembling or disassembling the refrigerator handles, grasp the handle firmly to avoid dropping it. • Do not swing the handle into nearby people or animals. • Make sure that the bracket hole of the handle fits properly into the stopper bolt of the door. Assemble the set screws to fix the handle into place. • Make sure that there is not a gap between the door and handle after assembling the handle. Tools Needed • 3/32 in. Allen wrench • 1/8 in. Allen wrench • 1/4 in. Allen wrench Removing the Refrigerator Handles 1 Loosen the set screws a with a 3/32 in. Allen wrench and remove the handle. 2 Loosen the mounting fasteners b that connect to the refrigerator door and handle using a ¼ in. Allen wrench, and remove the mounting fasteners. INSTALLATION 15 Assembling the Refrigerator Handles 1 Assemble the mounting fasteners a at both ends of the handle with a ¼ in. Allen wrench. 2 Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws b with a 3/32 in. Allen wrench. Removing the Freezer Drawer Handle 1 Loosen the set screws a located on the lower side of the handle with a ⅛ in. Allen wrench and remove the handle. 2 Loosen the mounting fasteners b with a ¼ in. Allen wrench, and remove the mounting fasteners. ENGLISH