LG LRFDS3006D Owners Manual - Page 16
Removing/Assembling the, Doors and Drawers
![]() |
View all LG LRFDS3006D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 INSTALLATION Assembling the Freezer Drawer Handle 1 Assemble the mounting fasteners a at both ends of the handle with a ¼ in. Allen wrench. Removing the Hinge Cover Remove the screws from the hinge cover at the top of the refrigerator. Lift the hook (not visible), located at the bottom of the front side of the cover with a flat-head screwdriver. 2 Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws b with a ⅛ in. Allen wrench. Removing the Left Refrigerator Door 1 The water supply is connected to the upper right part of the rear surface of the refrigerator. Remove the clip in the joint area. Hold the water supply connection and gently push the collet a to detach the water supply line as shown. Removing/Assembling the Doors and Drawers If the entrance door is too narrow for the refrigerator to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway. WARNING • Use two or more people to remove and install the refrigerator doors and freezer drawer. • Disconnect the electrical supply to the refrigerator before installing. • Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. • Be careful when handling the hinge and stopper. • Remove food and bins before detaching the doors and drawers. • Do not hold the handle when removing or replacing the doors and drawer as the handle may come off. Tools Needed • 3/32 in. Allen wrench • 1/8 in. Allen wrench • 1/4 in. Allen wrench NOTE • Disassembling/Assembling the Water Lines b Collet c Tube d Insert line e Clip
![](/manual_guide/products/lg-lrfxc2406d-owners-manual-7c9ad0b/16.png)