LG LRSDS2706D Owners Manual - Page 31

Drawers, Refrigerator Shelves, InstaView

Page 31 highlights

ENGLISH • Wax paper or wax-coated freezer wrap • Thin, semi-permeable wrap Drawers Removing/Assembling Drawers 1 To remove drawers, pull them out to full extension, lift the front, and pull straight out. NOTE • When removing or installing the drawer, lift the cover to help remove or insert the drawer. 2 To assemble drawers, slightly tilt up the front, insert into the frame and push back into place. CAUTION • Use both hands to remove and assemble drawers. The compartment is heavy when filled with food and may cause injury if dropped. • Open refrigerator doors fully when removing or assembling drawers. • You will see the water tank while removing the Fresh Zone drawer. Do not remove the water tank or water leakage may occur. The water tank is not a removable part. b Water tank (Type B) OPERATION 31 Refrigerator Shelves The shelves in the refrigerator are adjustable to meet individual storage needs. Adjusting the shelves to fit items of different heights will make finding the exact item you want easier. Detaching/Assembling Shelves CAUTION • Do not clean glass shelves with warm water while they are cold. Shelves may break if exposed to sudden temperature changes or impact. 1 To detach, remove all items from the shelf. Lift the back of the shelf slightly to disengage the rail stops. 2 Holding the shelf with both hands, tilt the shelf and pull it out. 3 To assemble, tilt the front of the shelf up and guide the shelf into the slots at a desired height, keeping shelf holder down. 4 Slide the shelf in, then lower the front of the shelf. CAUTION • Make sure that shelves are level from one side to the other. Failure to do so may result in the shelf falling or spilled food. a Water tank (Type A) InstaView This feature is only available on some models.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

31
OPERATION
ENGLISH
Wax paper or wax-coated freezer wrap
Thin, semi-permeable wrap
Drawers
Removing/Assembling Drawers
1
To remove drawers, pull them out to full
extension, lift the front, and pull straight out.
NOTE
When removing or installing the drawer, lift the
cover to help remove or insert the drawer.
2
To assemble drawers, slightly tilt up the front,
insert into the frame and push back into
place.
CAUTION
Use both hands to remove and assemble
drawers. The compartment is heavy when filled
with food and may cause injury if dropped.
Open refrigerator doors fully when removing or
assembling drawers.
You will see the water tank while removing the
Fresh Zone drawer. Do not remove the water
tank or water leakage may occur. The water tank
is not a removable part.
a
Water tank (Type A)
b
Water tank (Type B)
Refrigerator Shelves
The shelves in the refrigerator are adjustable to
meet individual storage needs.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
Detaching/Assembling Shelves
CAUTION
Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
1
To detach, remove all items from the shelf.
Lift the back of the shelf slightly to disengage
the rail stops.
2
Holding the shelf with both hands, tilt the
shelf and pull it out.
3
To assemble, tilt the front of the shelf up and
guide the shelf into the slots at a desired
height, keeping shelf holder down.
4
Slide the shelf in, then lower the front of the
shelf.
CAUTION
Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf
falling or spilled food.
InstaView
This feature is only available on some models.