LG LSDF9969BD Owners Manual - Page 8

8 PARTS AND FEATURES CONTROL PANEL Cycles Select your desired cycle. STEAM POWER This cycle is for heavily and hard soiled dishes. Steam Power defaults to the highest spray intensity and uses the power of steam to wash heavily soiled dishes. STEAM DUAL This cycle washes the upper and lower racks at different spray intensities. The default setting for this cycle washes the lower rack with strong spray intensity and the upper rack with soft spray intensity. This provides optimum cleaning performance for mixed loads, including fine china and stemware. If other combinations are desired, use the steps listed below to change the intensities or to use the HALF LOAD feature. How To Use Steam Dual: 1. Select Steam Dual. 2. Press the Spray button to toggle between Soft, Medium and Strong for the upper spray arm. 3. After making your selection for the upper spray arm, press the Half Load button. 4. Press the Spray button to toggle between Soft, Medium and Strong for the lower spray arm. 5. Close the door to start the cycle. STEAM DELICATE This cycle adds the gentle power of steam to boost the cleaning power of the delicate cycle. The cycle is intended for effectively cleaning delicate items such as fine china and stemware. NORMAL This cycle is for normally soiled, everyday loads. QUICK & DRY This is a shortened cycle that is intended for washing and drying recently used dishes or lightly soiled loads. During this cycle, both spray arms will run at the same time. QUICK This is a shortened cycle that is intended to wash recently used or lightly soiled loads, without drying. CHIME ON/OFF To enable or disable the chime, first, turn on the dishwasher. Press and hold the Quick and Steam Delicate buttons simultaneously for approximately three seconds. To cancel a cycle To cancel a cycle, open the door and then press and hold the Steam Delicate and Normal buttons together for approximately three seconds. The drain pump will activate and the cycle will cancel. The display will show "dr" and the dishwasher will drain the water. After the dishwasher is drained, the power will turn off. If power is turned on and no cycle has been selected, the dishwasher will power off within four minutes. Cycle Options (Refer to the control panel on the next page) Press the desired cycle and then select the options for that cycle. EXTRA DRY Select the EXTRA DRY option for better drying performance. This option adds 60 minutes of extra drying time to the cycle. The EXTRA DRY button will illuminate when the option has been selected. RINSE Repeated pressing of the Rinse button will select the desired Rinse option. The Sanitary, Extra Rinse, or Sanitary and Extra Rinse lights will show in the bottom left portion of the display. SANITARY ( ) This high-temperature rinse sanitizes dishes and glassware in accordance with NSF/ANSI Standard 184 for residential dishwashers. Certified dishwashers are not intended for licensed food establishments. EXTRA RINSE ( R+ ) The Extra Rinse symbol indicates that an extra rinse has been added to the cycle. An extra rinse can help reduce hard water spotting on dishes. To add an extra rinse, press the Rinse button repeatedly until the Extra Rinse symbol appears in the display. Rinse Only This cycle is a quick rinse for dishes that will not be washed immediately. The cycle rinses dishes that have excess soil to soften dried on residue. Rinsing the dishes helps prevent odors in the dishwasher. No detergent should be used. To select the Rinse Only cycle, turn the dishwasher on, and press Rinse once without pressing any other cycle buttons. The Rinse Only cycle is not available with any other cycles.