LG LSSB2692ST Owners Manual - Page 41

ENGLISH Care and Maintenance Problem Not dispensing water. Possible Causes New installation or water line recently connected. The dispenser panel is locked. The dispenser is not set for water dispensing. Refrigerator or freezer doors are not closed properly. Water filter has been recently removed or replaced. Tubing connecting refrigerator to house supply valve is kinked. The house water supply is not connected, the valve is not turned on fully, or the valve is clogged. Solutions Dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system. Do not dispense the entire 2.5 gallon amount continuously. Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. Press and hold the Lock button for three seconds to unlock the control panel and dispenser. The dispenser can be set for ice or water. Make certain that the control panel is set for the proper operation. Press the Water button on the control panel to dispense water. Water will not dispense if any of the refrigerator doors are left open. After the water filter is replaced, dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system. Do not dispense the entire 2.5 gallon amount continuously. Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. The tubing can kink when the refrigerator is moved during installation or cleaning resulting in reduced water flow. Straighten or repair the water supply line and arrange it to prevent future kinks. Connect refrigerator to the water supply and turn the water shutoff valve fully open. If the problem persists, it may be necessary to contact a plumber. 40