LG LSXC22426S Owners Manual - Page 18

ENGLISH 18 INSTALLATION 7 CONNECT THE TUBING TO THE VALVE Place the compression nut and ferrule (sleeve) for copper tubing onto the end of the tubing and connect it to the shuto valve. Make sure the tubing is fully inserted into the valve. Tighten the compression nut securely. Saddle-Type Shutoff Valve Compression Nut 10 TURN THE WATER ON AT THE SHUTOFF VALVE Tighten any connections that leak. Packing Nut Outlet Valve Ferrule (sleeve) 8 FLUSH OUT THE TUBING Turn the main water out the tubing until the water is clear. Shut the water o at the water valve after about one quart of water has tubing. 9 CONNECT THE TUBING TO THE REFRIGERATOR NOTE: Before making the connection to the refrigerator, be sure that the refrigerator power cord is not plugged into the wall outlet. a. Remove the plastic exible cap from the water valve. b. Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown. c. Insert the end of the copper tubing into the connection as far as possible. While holding the tubing tting. Tubing Clamp ¼ in. Tubing CAUTION Check to see if leaks occur at the water line connections. Leveling The refrigerator has two front leveling legs. Adjust the legs to alter the tilt from front-to-back or side-to-side. If the refrigerator seems unsteady, the doors do not close easily, adjust the refrigerator's tilt using the instructions below: NOTE: Tools Required: 11/16" (18mm) wrench or flat-blade screwdriver. 1 Turn the leveling leg counterclockwise to raise that side of the refrigerator or clockwise to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator. Height di erence Left leveling leg Height di erence CHANGE FILTER C F C PRESS & HOLD F ¼ in. Compression Nut Ferrule (sleeve) Refrigerator Connection