LG LSXC22426S Owners Manual - Page 41

MAINTENANCE 41 ENGLISH Application Guidelines/ Water Supply Parameters Service Flow 0.5 gpm (1.9 lpm) Water Supply Water Pressure Water Temperature - Potable Water 20 -120 psi (138 - 827 kPa) 33°F - 100°F (0.6°C - 38°C) It is essential that the manufacturer's recom- replacement requirements be carried out for the product to perform as advertised. NOTE While the testing was performed under standard laboratory conditions, actual performance may vary. Replacement Cartridge: ADQ73613401 For estimated costs of replacement elements please call 01 8000 910 683 (24 hours per day/7 days per week) or visit our website at www.lge.com WARNING To reduce the risk associated with choking: Do not allow children under 3 years of age to have access to small parts during the installation of this product. To reduce the risk associated with the ingestion of contaminants: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or cyst reduction may be used on disin- cysts. EPA Establishment # 070595MEX-001 CAUTION To reduce the risk associated with property damage due to water leakage: Read and follow Use Instructions before installation and use of this system. Installation and use MUST comply with all state and local plumbing codes. Do not install if water pressure exceeds 120 psi (827 kPa). If your water pressure exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure. Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition. Do not install on hot water supply lines. The maximum operating water tem- (37.8°C). when temperatures drop below 40°F (4.4°C). replaced every 6 months, at the rated capacity or if a noticeable reduction in tridge when temperatures are expected to drop below 33° F (0.6 ºC). Do not install systems in areas where ambient temperatures may go above prevention device is installed on a water system, a device for controlling pressure due to thermal expansion must be installed. and free of leaks. Manufactured for LG Electronics by MCM Co., Ltd. 45-10, Nowon-Ri, Yiwol-Myun, Jinchun-Kun, Chung-Buk, Korea.