LG LTC22350SS Owner's Manual - Page 19

REFRIGERATOR INSTALLATION • Remove the outer lower Decorative Screw from housing at area between freezer and refrigerator doors (Fig. 31). (You will need this hole for the Middle Hinge Bracket). Fig. 31 • Place Upper Hinge's Pin in the top of freezer door and line up the Upper Hinge with holes in top of refrigerator. Use the 3 bolts to replace Hinge. • Following illustration, flip the Middle Hinge Bracket (Flange will now be on top) and position on left side of refrigeratorand re-attach with two bolts and a Phillips screw. (Fig. 32). • Place refrigerator door down over pin on bottom hinge. (Fig. 32). • Place washer between refrigerator door and middle hinge and re-attach Hinge Pin to Hinge Bracket with 1/4-in.socket wrench. Fig. 35 • Tighten bolts. Force-fit Top Hinge Cover over Top Hinge. Fig. 36 NOTE: Bracket has been flipped, but Hinge Pin stays in the same orientation with its hexagonal end facing upward. Fig. 32 • Replace cover from left side of refrigerator top onto the right of top to cover the holes. Cover is also force-fitted Flange Cover (on top of refrigerator) • Place Decorative Screw into outer hole on right side of housing. • Attach cover on the right side. Cover is force-fitted Decorative Screw Fig. 37 After changing doors, make sure that the corners of the Door Gaskets are not folded over. To ensure a good seal, apply a small amount of silicon grease on the corners of gaskets. Corners Fig. 33 REATTACHING FREEZER DOOR • Put freezer door down over the Hinge Pin on the Middle Hinge Pin Bracket Fig. 34 19