LG LTC22350SS Owner's Manual - Page 21

Using Your Refrigerator - problems

Page 21 highlights

USING YOUR REFRIGERATOR ENSURING PROPER AIR CIRCULATION In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections. As shown in the illustration below, cool air enters through the bottom of the freezer section and moves up. Most of the air then flows through the freezer section vents and recirculates under the freezer floor. The rest of the air enters the refrigerator section through the top vent. SETTING THE CONTROLS Your refrigerator has two controls to set the temperatures one in the refrigerator compartment , and other in the freezer compartment. REFRIGERATOR CONTROL Initially set the Refrigerator Control on the middle setting. Press the TEMPERATURE ADJUST button until it reaches the middle position (The Third LED turns ON). Leave the refrigerator on this setting for 24 hours to reach the correct temperature. After 24 hours, adjust the compartment temperature as you desire. ALWAYS wait 24 hours before you adjust the temperature. If you want to set the refrigerator compartment temperature to a warmer temperature than the current, continue pressing the TEMPERATURE ADJUST button until it reaches the desired temperature. 12 34 WARMER TEMPERATURE ADJUST COLDER Do not block any of these vents whit food packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur. IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thorougly clean both sections to eliminate odors. To prevent odor transfer and drying out food, wrap or cover foods tightly. (See the Food Storage Guide section for details.) Note: If you close the fresh food compartment door applying more force than necessary, freezer door may get open and close again, due internal air flow of refrigerator. Air flow FREEZER CONTROL The freezer control should come from factory on the middle setting (number 2). Wait 24 hours before adjusting the freezer compartment temperature. Roll the knob to set the freezer temperature as you desire. ALWAYS wait 24 hours after any adjustment to reach the desired temperature. FREEZER TEMPERATURE 1 Cold 1 2 Normal 2 3 3 Colder NOTE: Setting at higher number of the Freezer compartment, the temperature of freezer compartment becomes colder. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, cool air enters through the bottom
of the freezer section and moves up. Most of the air then
flows through the freezer section vents and recirculates
under the freezer floor. The rest of the air enters the
refrigerator section through the top vent.
Do not block any of these vents
whit food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
IMPORTANT:
SETTING THE CONTROLS
Your refrigerator has two controls to set the temperatures
one in the refrigerator compartment , and other in the
freezer compartment.
REFRIGERATOR CONTROL
FREEZER CONTROL
NOTE:
Setting at higher number of the Freezer compartment,
the temperature of freezer compartment becomes colder.
USING YOUR REFRIGERATOR
21
Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thorougly clean both sections to eliminate odors.
To prevent odor transfer and drying out food, wrap or
cover foods tightly. (See the Food Storage Guide section
for details.)
1
2
3
4
WARMER
COLDER
TEMPERATURE
ADJUST
F
R
E
E
Z
E
R
T
E
M
P
E
R
A
T
U
R
E
1
2
3
1
2
3
Cold
Normal
Colder
Note:
If you close the fresh
food compartment door
applying more force than
necessary, freezer door
may get open and close
again, due internal air flow
of refrigerator.
Initially set the Refrigerator Control on the middle setting.
Press the TEMPERATURE ADJUST button until it
reaches the middle position (The Third LED turns ON).
Leave the refrigerator on this setting for 24 hours to reach
the correct temperature. After 24 hours, adjust the
compartment temperature as you desire. ALWAYS wait
24 hours before you adjust the temperature. If you want to
set the refrigerator compartment temperature to a warmer
temperature than the current, continue pressing the
TEMPERATURE ADJUST button until it reaches the
desired temperature.
The freezer control should come from factory on the
middle setting (number 2). Wait 24 hours before adjusting
the freezer compartment
temperature. Roll the knob to
set the freezer temperature as you desire. ALWAYS wait
24 hours after any adjustment to reach the desired
temperature.
Air flow