LG LUV200R Owner's Manual - Page 17
Emptying the Dust Tank, Cleaning the Dust Tank - filters
View all LG LUV200R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CARE & CLEANING Emptying the Dust Tank WARNING Electrical shock and personal injury hazard. Always unplug power cord from electrical outlet before performing any service on vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. For best performance, always empty the dust tank when the dirt level reaches the MAX line. TO REMOVE DUST TANK: Press the dust tank release button, tilt the dust tank back, then lift it out of the vacuum cleaner. TO REINSTALL THE DUST TANK: Place it in the holder, then tilt forward until it clicks into place. Make sure the dust tank is properly seated! Warning: Do not touch the gears or switches located on the main body below the dust bin. Cleaning the Dust Tank For optimal performance, check filters regularly and clean when necessary. To Clean the Dust Tank: 1. Remove the dust tank from the vacuum cleaner. 2. Press the dirt release and open the bottom plate. 3. Wipe out the dust tank with a soft cloth or paper towel. TO EMPTY DUST TANK: Press the emptying dirt release and open the bottom plate, as shown. 4. Release the latch on the Side door on both the right and left sides. 5. Remove any hair, fibers or other debris from the dust separator. Do not remove the cones attached to the side door for cleaning. NEVER operate the vacuum cleaner with wet filters or components! 16