LG LUV200R Owner's Manual - Page 19
Pet Hair Turbine tool, Agitator Maintenance - agitator brush
View all LG LUV200R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
CARE & CLEANING 3. Wash the filter cleanly in flowing water. Agitator Maintenance 4. Remove moisture. WARNING Electrical shock and personal injury hazard. Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical shock or personal injury. Frequently check the agitator brush area for hair, string and lint buildup. 5. Dry completely away from sunlight. 6. Make sure to push down on the filter until it locks in place before closing the exhaust filter cover. Remove the Agitator Brush Cover: 1. Unplug the vacuum cleaner. Press the left foot pedal to release the head. Lower the handle until the vacuum cleaner is lying flat on the floor. 2. Turn the vacuum cleaner over, so that the agitator is facing up. 3. Set the agitator on a cloth or a smooth surface. Remove the six screws on the bottom of the head and remove the cover. Pet Hair Turbine tool To clean the Pet hair turbine tool 1. Remove the four screws on the bottom of the Pet hair turbine tool. 2. Lift off the cover. 3. Remove any debris. To reassemble: 4. Carefully press cover onto tabs until they snap into place. 5. Insert and tighten screws removed in Step 1. Do NOT overtighten the screws. Do Not use the pet hair turbine tool on any animal. 4. Carefully remove any accumulated string, hair, etc. from the agitator and the agitator area. To reinstall the cover. Reverse the steps above. 1 2 18