LG LUWD1CW Owners Manual - Page 33
Maintenance
![]() |
View all LG LUWD1CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
MAINTENANCE 33 MAINTENANCE ENGLISH WARNING To reduce the risk of fire, electric shock, or injury to persons, read this entire owner's manual, including the Important Safety Instructions, before operating this washer. ••Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death. ••Do not use volatile substances (benzene, paint thinner, alcohol, acetone, etc.) or detergents with strong chemical components when cleaning the washer. Doing so may cause discoloration or damage to the machine, or may cause a fire. NOTE ••Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish. Regular Cleaning Care After Wash After the cycle is finished, wipe the lid and the inside of the lid seal to remove any moisture. ••Leave the lid open to dry the tub interior. ••Wipe the body of the washer with a dry cloth to remove any moisture. Cleaning the Exterior Proper care of your washer can extend its life. Lid: Wash with a damp cloth on the outside and inside and then dry with a soft cloth. Exterior: ••Immediately wipe off any spills. ••Wipe with a damp cloth. ••Do not touch the surface or the display with sharp objects. Care and Cleaning of the Interior ••Use a towel or soft cloth to wipe around the washer lid opening and lid glass. ••Always remove items from the washer as soon as the cycle is complete. Leaving damp items in the washer can cause wrinkling, color transfer, and odor. ••Run the Tub Clean cycle once a month, or more often if needed, to remove detergent buildup and other residue. Cleaning the Tub ••Some environmental and usage conditions can cause a residue to build up in the tub over time and can lead to a mildewy or musty smell. Periodic use of Tub Clean cycle helps to prevent mildew or a musty smell. Run the Tub Clean cycle once a month, or more often under heavy use conditions or if odor is present. 1 Remove any clothing from the tub. 2 Add cleaning agents. ••For other tub cleaning products, follow the cleaner manufacturer's instructions and recommendations. ••Do not exceed the manufacturer's recommended amount when adding bleach or powdered cleaners. Powdered detergent may remain in the tub after cleaning. 3 Close the lid and press the Power button to turn the washer on. 4 Press the Tub Clean button and close the drawer to start the cycle. 5 After the cycle ends, open the lid and allow the tub interior to dry completely.
![](/manual_guide/products/lg-luwd1cw-owners-manual-fa4f060/33.png)