LG LWD3010ST Owner's Manual - Page 33

Before Calling For Service - review

Page 33 highlights

ENGLISH MAINENANCE BEFORE CALLING FOR SERVICE Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Problem Oven control beeps and displays any F code error. Possible Causes / Solutions • Electronic control has detected a fault condition. Press UPPER CLEAR/OFF or LOWER CLEAR/OFF to clear the display and stop beeping. Reprogram oven. If fault reoccurs, record fault number. Press UPPER CLEAR/OFF or LOWER CLEAR/OFF and contact a qualified service technician. Code F-3 F-9 F-11 F-19 CAUSE Key held down too long or shorted key No heating (Upper oven) Communication Error No heating (Lower oven) Oven will not work • Plug on oven is not completely inserted in the electrical outlet. - Make sure electrical plug is plugged into a live, properly grounded outlet. • A fuse in your home may be blown or the circuit breaker tripped. - Replace the fuse or reset the circuit breaker. • Oven controls improperly set. - See the Using the oven section. • Oven too hot. - Allow the oven to cool to below locking temperature. Appliance does not operate. • Make sure cord is plugged correctly into outlet. Check circuit breakers. • Service wiring is not complete. Contact your appliance Servicer for assistance. • Power outage. Check house lights to be sure. Call your local electric company for service. Oven light does not • Replace or tighten bulb. See Changing Oven Light section in this Owner's manual. work. Oven smokes excessively during broiling. • Control not set properly. Follow instructions under Setting Oven Controls. • Meat too close to the element. Reposition the rack to provide proper clearance between the meat and the element. Preheat broil element for searing. • Meat not properly prepared. Remove excess fat from meat. Cut remaining fatty edges to prevent curling, but do not cut into lean. • Insert on broiler pan wrong side up and grease not draining. Always place grid on the broiler pan with ribs up and slots down to allow grease to drip into pan. • Grease has built up on oven surfaces. Regular cleaning is necessary when broiling frequently. Old grease or food spatters cause excessive smoking. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

33
ENGLISH
MAINENANCE
BEFORE CALLING FOR SERVICE
Before you call for service, review this list. It may save you time and expense. The list includes common
occurrences that are not the result of defective workmanship or materials in this appliance.
Possible Causes / Solutions
Oven control beeps
and displays any F
code error.
Oven will not work
Appliance does not
operate.
Oven light does not
work.
Oven smokes
excessively during
broiling.
Problem
• Electronic control has detected a fault
condition. Press
UPPER CLEAR/OFF
or
LOWER CLEAR/OFF
to clear the display
and stop beeping. Reprogram oven. If fault
reoccurs, record fault number. Press
UPPER
CLEAR/OFF
or
LOWER CLEAR/OFF
and
contact a qualified service technician.
• Plug on oven is not completely inserted in the electrical outlet.
- Make sure electrical plug is plugged into a live, properly grounded outlet.
• A fuse in your home may be blown or the circuit breaker tripped.
- Replace the fuse or reset the circuit breaker.
• Oven controls improperly set.
- See the Using the oven section.
• Oven too hot.
- Allow the oven to cool to below locking temperature.
• Make sure cord is plugged correctly into outlet. Check circuit breakers.
• Service wiring is not complete. Contact your appliance Servicer for assistance.
• Power outage. Check house lights to be sure. Call your local electric company for
service.
• Replace or tighten bulb. See
Changing Oven Light
section in this Owner’s manual.
• Control not set properly. Follow instructions under Setting Oven Controls.
• Meat too close to the element. Reposition the rack to provide proper clearance
between the meat and the element. Preheat broil element for searing.
• Meat not properly prepared. Remove excess fat from meat. Cut remaining fatty
edges to prevent curling, but do not cut into lean.
• Insert on broiler pan wrong side up and grease not draining. Always place grid on
the broiler pan with ribs up and slots down to allow grease to drip into pan.
• Grease has built up on oven surfaces. Regular cleaning is necessary when broiling
frequently. Old grease or food spatters cause excessive smoking.
Code
F-3
F-9
F-11
F-19
CAUSE
Key held down too long or
shorted key
No heating (Upper oven)
Communication Error
No heating (Lower oven)