LG OLED65W9PUA Owners Manual - Page 7

ENGLISH Provided item Wall mount Punching Guide Wall mounting screw Ø5 x L65 Wall mounting anchor Wall mounting screw for wood Ø3 x L18 •• Check the material of the wall and the thickness of the finishing. •• Use the Wall mount anchor for wall material of concrete, light concrete, strong natural stone, soft natural stone masonry brick and hallow block that do not crack. Wall Material Tools Wall Thickness Concrete Brick Natural stone Wall mounting anchor, Wall mounting screw, Drill bit (Ø 3 / 6 / 8) 70 mm (2.7 inches) Metal Panel Plywood Wall mounting screw, Drill bit (Ø 1.8) 30 mm (1.1 inches) EPS Panel Penetrate the wall Plasterboard + Plywood 30 mm (1.1 inches) •• When installing on a gypsum board or medium-density fiberboard (MDF) wall, fasten the screws to the studs that support the wall. If there are no studs, check the distance from the inner wall before installing. -- 30 mm (1.1 inches) or below: Install directly on the inner wall using a 65 mm (2.5 inches) screw. -- 30 mm (1.1 inches) or above: Install using a separate hanger. Wall •• When installing the wall mount, check the positions of the wooden studs using a stud finder. Then, fasten the screws on at least two separate studs before proceeding. Stud Wall mount •• When installing the product on wall material not designated, install the product so that each location can withstand the pull out load of 70 kg (154.3 lbs) and shear load of 100 kg (220.4 lbs) or above. •• Use the Ø 8 mm (0.3 inches) drill bit for concrete and hammer (Impact) drill. 7