LG OLED65W9PUA Owners Manual - Page 8
Tools you will need, How to attach to masonry walls
View all LG OLED65W9PUA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ENGLISH Tools you will need •• Phillips head + driver (manual or motorized) / Ø 8 mm (0.3 inches) Drill bit / Level / Stud finder / Drill How to attach to masonry walls Please follow the below direction. 1 Use a drill bit Ø 8 mm (0.3 inches) to drill a hole for the anchor location within a depth of 80 mm (3.1 inches) to 100 mm (3.9 inches). 2 Clean the drilled hole. 3 Insert the sealed wall mounting anchor to the hole. (When inserting the anchor, use a hammer.) Wall mounting anchor 4 Set the wall mount on the wall by aligning to the location of the hole. And, set the angle adjusting part to face upward. 5 Align the wall mounting screw to the hole and tighten it. Then, fasten the screws at torque of 45 kgf/cm (39.06 lbf/in) to 60 kgf/cm (52.08 lbf/in). Wall mounting screw • When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV. • Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall. • Make sure that children do not climb on or hang on the TV. • Use a platform or cabinet that is strong and large enough to support the TV securely. • When installing the product, first check that the wall is strong enough. Use the anchors and screws provided. -- If you use anchors and screws that are not specified by the manufacturer, they may not hold the weight of the product, causing safety issues. • Be sure to use the accessory cable provided. Otherwise, friction between the product and the wall may cause damage to the connector. • When drilling holes into the wall, make sure you use a drill and drill bit with the specified diameter. Ensure that you also follow the instructions regarding the depth of the holes. -- Otherwise, the product may be installed incorrectly and cause safety issues. • Wear safety gloves when installing the product. Do not use your bare hands. -- Otherwise, it may cause personal injury. • If some parts of the wall mount do not touch the wall after it is attached, in addition to the other mounting hardware, add the double sided tape included with the accessories to stick the mount to the wall. • If some parts of the wall mount do not touch the wall after using the wall mounting screws for wood, use the remaining screws. • Be sure to use only the exclusive wall mounting screws provided as accessories. • If you want to connect the TV Cable that is connected to the back panel partition, please use the enclosed Punching Guide. 8