LG ST600 User Manual - Page 44

44 Appendix Audio Output Specifications Jack/Setting Source Dolby Digital Dolby Digital Plus DTS Linear PCM 2ch Linear PCM 5.1ch Linear PCM 7.1ch PCM Stereo PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch Digital Output (DIGITAL AUDIO OUT) *4 DTS Re-Encode*3 *5 Primary Pass-Thru DTS Dolby Digital DTS Dolby Digital DTS DTS DTS PCM 2ch DTS PCM 2ch DTS PCM 2ch Jack/Setting Source PCM Stereo HDMI OUT DTS Re-Encode*3 *5 Primary Pass-Thru *1 *2 *3 Dolby Digital PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch DTS Dolby Digital Plus DTS PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch DTS Linear PCM 2ch Linear PCM 5.1ch PCM 2ch DTS Linear PCM 5.1ch Linear PCM 7.1ch PCM 2ch DTS Linear PCM 7.1ch *1 The secondary and interactive audio may not yy If the HDMI OUT jack is connected to your be included in the output bitstream if [Digital TV with High Speed HDMI™ Cable and Dolby Output] or [HDMI] option is set to [Primary Pass- Digital Plus is outputted from HDMI OUT jack, Thru]. (Except LPCM Codec: the output always DIGITAL AUDIO OUT jack is limited to "PCM 2ch" include interactive and secondary audio.) (When the HDMI and DIGITAL AUDIO OUT are 6 *2 This unit automatically selects the HDMI audio connected simultaneously). according to the decoding capability of the yy The audio is outputted as PCM 48 kHz/16 bit for connected HDMI device even though [HDMI] MP3/WMA file. option is set to [Primary Pass-Thru]. yy You must select a digital audio output and *3 The [Primary Pass-Thru] setting of the [HDMI] a maximum sampling frequency that your option and [DTS Re-Encode] setting of the Amplifier (or AV receiver) accepts using [Digital [Digital Output] option cannot be set together. Output], [HDMI] and [Sampling Freq.] options on If you set them together, the [HDMI] or the [Setup] menu (see page 24). [Digital Output] option is set to [PCM Stereo] automatically. yy If the audio format of the digital output does not match the capabilities of your receiver, the *4 On the [Digital Output] audio output, the receiver will produce a strong, distorted sound sampling frequency of DIGITAL AUDIO OUT is or no sound at all. limited to 96 kHz. yy Multi-channel Digital Surround Sound via digital *5 If the [HDMI] or [Digital Output] option is set to connection can only be obtained if your receiver [DTS re-encode], the audio output is limited to is equipped with a Digital Multi-channel decoder. 48 kHz and 5.1Ch. yy If [HDMI] option is set to [Digital Output] option is set to [Primary Pass-Thru] while playback Dolby Digital Plus or DIGITAL AUDIO OUT is limited to "PCM 2ch". Appendix