LG TD-V10020G User Guide - Page 32

HOW TO USE CYCLE OPTION BUTTONS Your dryer features several additional cycle options to customize cycles to meet your individual needs. Certain option buttons also feature a special function (see the following page for details) that can be activated by pressing and holding that option button for 3 seconds. TOAdd Cycle Options to a Cycle: O Turn on the dryer and turn the cycle selector knob to select the desired cycle. e use the cycle settings buttons to adjust the settings for that cycle. O Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. O Press the START/PAUSE button to start the cycle. The dryer will start automatically. ANTI BACTERIAL This option will add a high heat setting to reduce bacteria. It can only be used with the HEAVY DUTY, CO-N-ON/ TOWELS, and NORMAL cycles. NOTE: Do not use this cycle with delicate fabrics. WRINKLE CARE Selecting this option will tumble the load periodically for up to 3 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to immediately remove items from the dryer. DAMP DRY BEEP With this option, the dryer will beep when the load is approximately 80% dry. This allows you to remove faster-drying lightweight items or items that you would like to iron or hang while still slightly damp. RACK DRY Use RACK DRY with items, such as wool sweaters, silk, and lingerie, that should dry flat. RACK DRY can also be used with items that should not be tumbled dry, such as gym shoes or stuffed animals. Press and hold the WRINKLE CARE button for 3 seconds to activate or deactivate the RACK DRY function. NOTE: NEVER use the rack with a tumble dry cycle. TOInstall the Drying Rack With the dryer door open, slide the rack into the dryer drum. Make sure it is seated evenly on the edge of the inner door rim and resting flat on the inside of the dryer. NOTE: Be sure to remove the drying rack after using the RACK DRY cycle. 52