LG WM2277HW Owners Manual - Page 21

Problem, Possible, Cause, Solution - troubleshooting

Page 21 highlights

TROUBLESHOOTING GUIDE i :i :, Problem Washer does not start Possible Cause • Electrical power cord may not be plugged in or connection may be foose, • House fuse is blown, circuit breaker tripped,or a power outage has occurred Solution Make sure plug fits tightJy in wall outlet., Reset circuit breaker or replace fuse Do not increase fuse capacity If problem is a circuit overload, have it corrected by a qualified electrician • Water supply tap is not turned on.. Turn on water supply tap Washer won't spin • Check that the door is firmly shut Close the door and press the Start/Pause button After pressing the StaWPause button, it may take a few moments before the clothes washer begins to spin,. The door must lock before spin can be achieved, Wash cycle time delayed • The washing time may vary by the amount of laundry, water pressure, water temperature, and other using conditions If the imbalance is detected or if the suds removing program operates, the wash time shall be increased 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

TROUBLESHOOTING GUIDE
i :i
:
,
Problem
Possible
Cause
Washer does not start
Washer
won't
spin
Wash cycle time delayed
Electrical power cord may not
be plugged in
or
connection
may be foose,
House fuse is blown, circuit
breaker
tripped,
or a
power
outage has occurred
Water supply tap is not turned
on..
Check that the door is firmly
shut
• The washing time may vary by
the amount of laundry, water
pressure,
water temperature,
and other using conditions
Solution
Make sure plug fits tightJy
in
wall
outlet.,
Reset circuit breaker or replace fuse
Do not increase fuse capacity
If problem is a circuit overload, have
it corrected by a qualified electrician
Turn on water supply tap
Close the door and press the
Start/Pause
button After pressing the
StaWPause button, it may take a few
moments before the clothes washer
begins to spin,.The door must lock before
spin can be achieved,
If the
imbalance is
detected or
if
the
suds removing program operates, the
wash time shall be
increased
21