LG WM2277HW Owners Manual - Page 6

INSTALLATIONINSTRUCTIONS = installation clearances The location must be large enough to fully open the washer door •' Washer dimensions (75 6cm) (10cm) [Side vi_] ::_ i:)i•!: • Most installations require a mimmum 4 in. (10 cm) clearance behind the washer. = Minimum installation spacing for recessed area installation. The following dimensions shown are for the minimum spacing allowed Additional spacing should be considered for installation and servicing • Additional clearances might be required for wall, door and floor moldings. -Additional spacing of 1 in (2 5 cm) on all sides of the washer is recommended to reduce noise transfer. Companion appliance spacing should also be considered 6 "=i _ _ _ ::: !" -_b-b-- =T' -_F+_- I" (2 5cm) (686 cm) (25 cm) iFront view] = Level floor • Allowable slope under entire washer is 1°., . To mlnlmtze noise and vibration, the washer MUST be Installed on a solidly constructed floor. . Carpeting and soft tile surfaces are not recommended • Never install the washer on a platform or weakly supported structure NOTE: A lirm, solid floor is even more crilical to a front Joading _vasher than Io a top-loader. If your floor is wo(_l aml!or frame conslrnclion, y_m may need to reinforce iL Front-loaders use substantially fas|er spin speeds than top-loaders, causing greater vibration, If the floor is md solid, your washer will vibrate. Yon will hear and feel the vibration lhroaghoul your Imuse. •' Power outlet • Must be within 60 in (1 5 m) of either side of the washer, Do not overload the cutlet with more than one appliance • Time-delay fuseor circuit breaker is recommended NOTE: It is the personal responsibility and obligation of the customer to have a proper outtel installed by a qualified eleelrician.