LG WM2277HW Owners Manual - Page 9

INSTALLATION INSTRUCTIONS = Level adjustment ii _i_iiii_i i? _ /_igher Adjustable feet Adjustable feet • Leveling the washing machine properly prevents excessive noise and vibration, Install the appliance on a solid and level floor surface, preferably in a corner of the room • If the floor is uneven, adjust the adjustable feet as required (Do not insert pieces of wood, etc., under the feet ) NOTE: Exfend the feel no more than necessary to level the washer. The more the feel are exleoded, the more the washer will vibrale_ * Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly levet (Use a level) • After the washer is level, tighten the lock nuts up against of the base of the washer Al! lock nuts must be tightened , tt is critical to adjust the feet pedectly This must be done while the washer is spinning with a load Use the wrench (supplied) to adjust the feet until there is no vibration, Then tighten the lock nuts to prevent further adjustment., NOTE: If there are vibration andnoise (luring the spin cycle, re-check the leveling of the washer, adjust the [eel as required, anti tighten the lock nuts securely to prevent changes in adjustment, Run the washer with a lesl load to make certain your washer is properly leveled,, Put approximately 6 poamts of tanmlrLy in the machine. Then, press POWER. RINSE+SPIN, and START!PAUSE, in tha! order. When Ihe machine spins al high speed, verify that it is slable° If nnl, adjust tile feel accordingly. * Diagonal Check When pushing do_lw the edges of lhe washing machine top plate diagonally, the machine should nol move up and down at all. (Please, check both directions.) If lhe machine rocks n,hcn pushlog the machine top plate diagonal(€, adjust the feet agaia, hi"