LG WM2277HW Owners Manual - Page 22

TROUBLESHOOTING GUIDE .... Problem Possible Cause Solution • Water suppty is not adequate in area_ • Water supply taps are not completely open,, • Water inlet hose is bent • The filter of the inlet hose clogged Check another tap in the house Fully open tap. Straighten hose Check the filter o[ the inlet hose, • Drain hose is bent or clogged,, • The drain filter is clogged Clean and straighten the drain hose CIean the drain fi]ter , Load is too small. • Load is out of balance. • The appliance has an imbalance detection and correction system i_individual heavy aMicles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, after severat atlempts to restart the spin cycle the machine will stop and the error code will be displayed Add 1 or 2 similar items to help balance the load Rearrange load to allow proper spinning • Is the door opened or not completely closed? Close the door completely * If dE is not released, call for service • The water overfills due to the faulty water valve. • The water level sensor malfunction. • Overload in motor. Unplug the power plug and ca]l for service Close the water tap, Unplug the power plug Call for service • Overload in motor, • The washer experienced a power failure Restart the cycle 22