Lacie 301161U User Manual - Page 116
Recovery Options
UPC - 093053707286
View all Lacie 301161U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
LaCie Ethernet Disk RAID (Firmware version 1.4) User Manual Protecting Local Disks page 115 19. When the completion screen appears, review the results and do one of the following: ■ Recovery Options To accomplish this Do this Recover another disk or partition Select Recover Another Disk. If you want to recover a different backup of the same computer from the same Ethernet Disk RAID, select Yes to retain the current configuration settings and return to step 10. If you want to recover a different computer's backup, or if you want to recover a backup from a different Ethernet Disk RAID, select No to modify the current configuration settings and return to step 6. Restart the computer Select Restart Computer. When the informational message appears, select OK. When prompted to confirm that you want to restart the computer, select Yes. You have 10 seconds to remove the recovery CD from the CD-ROM drive. 20. When the computer restarts, use the appropriate procedure for your system to configure the computer to boot from the local hard disk once more. If you changed the recovery password on the Ethernet Disk RAID, reset it in the Microsoft iSCSI Initiator* (as described in section 8.4. Resetting the Recovery Password in the Microsoft iSCSI Initiator). Start Windows Backup Software and remove protection from the recovered disk or partition (as described in section 7.9.5. Removing Protection). Protect the recovered disk once again (as described in section 7.2. Protecting Your Disks), re-using the original backup.