Lantronix NM2-FXS-01 Installation Guide Rev D - Page 11
Hardware Installation Procedure, Secure the M.2 NIC Assembly into place using the Securing Screw
View all Lantronix NM2-FXS-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Lantronix NM2-FXS-2230-SFP-01 Install Guide Hardware Installation Procedure 1. Remove PC cover. 2. Gently remove the HDD Assembly. See the Dell or Wyse documentation. 3. Remove the 15-Pin DSUB knockout. 4. Install the M.2 NIC Assembly into Motherboard M.2 Edge Connector. 5. Secure the M.2 NIC Assembly into place using the Securing Screw 6. Install the Fiber Optic Adapter into the VGA opening in PC Case, as shown below. 7. Attach to PC Case using Black SEMS Screw #6-32x1/4", and partially tighten to hold in place as shown below. 8. Align #4 Standoff with Top Hole in PC Case. 9. Slip #4 Nylon Washer on top of #4 Standoff and insert #4 Screw to secure. 10. Tighten using Black SEMS Screw #6-32x1/4". 11. Lift Locking Lever of FFC Connector on fiber optic adapter. 33730 Rev. D https://www.lantronix.com/ Page 11 of 17