Lantronix NM2-FXS-01 Installation Guide Rev D - Page 9

Caution, Warning

Page 9 highlights

Lantronix NM2-FXS-2230-SFP-01 Install Guide CAUTION: Only qualified persons should install the NIC. Failure to observe this caution could result in poor performance or damage to the equipment. Before installing the NIC, review the Pre-Installation Checklist and Safety Precautions below. CAUTION: Wear a grounding device and observe electrostatic discharge precautions when installing the NIC in a system. Failure to observe this caution could result in damage to the NIC. Before installing the NIC, review the Pre-Installation Checklist and Safety Precautions below. Before installing the NIC, ensure that system power is OFF, the power cord is unplugged from the power outlet, and that proper electrical grounding procedure has been followed. WARNING: High voltage inside the system may present a safety hazard. Make sure that the system power is off before removing the cover. Unplug and disconnect the PC and then wait for 15-20 seconds before plugging the NIC into the PC. When removing the NIC, unplug the Ethernet cable before removing the PC cover. 33730 Rev. D https://www.lantronix.com/ Page 9 of 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Lantronix
NM2-FXS-2230-SFP-01 Install Guide
33730 Rev. D
Page
9
of
17
CAUTION
: Only qualified persons should install the NIC. Failure to observe this caution could result in poor performance
or damage to the equipment. Before installing the NIC, review the Pre-Installation Checklist and Safety Precautions
below.
CAUTION
: Wear a grounding device and observe electrostatic discharge precautions when installing the NIC in a system.
Failure to observe this caution could result in damage to the NIC. Before installing the NIC, review the Pre-Installation
Checklist and Safety Precautions below. Before installing the NIC, ensure that system power is OFF, the power cord is
unplugged from the power outlet, and that proper electrical grounding procedure has been followed.
WARNING
: High voltage inside the system may present a safety hazard. Make sure that the system power is off before
removing the cover. Unplug and disconnect the PC and then wait for 15-20 seconds before plugging the NIC into the PC.
When removing the NIC, unplug the Ethernet cable before removing the PC cover.