Lantronix NM2-FXS-01 Installation Guide Rev D - Page 6
SFP Specifications, System Board Layout, Data Rate Mbps, Media, Wavelength nm, Transmission Distancekm
View all Lantronix NM2-FXS-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Lantronix NM2-FXS-2230-SFP-01 Install Guide SFP Specifications The TN-SFP-GE-100FX is a Small Form Factor Pluggable (SFP) transceiver compatible with the Multi-Sourcing Agreement (MSA), designed for SGMII MAC interface to 100BASE-FX. The SGMII MAC Interface uses modified 1000BASE-X Auto-Negotiation to indicate link, duplex, and speed to the MAC. It data links up to 2km with 50/125um multi mode fiber. Features include: • Data Rate (Mbps): 125 • Media: MMF • Wavelength (nm): 1310 • Transmission Distance(km): 2 • DDMI: Yes TN-SFP-GE-100FX transceivers support the 2-wire serial communication protocol per the SFP MSA. It is closely related to the E2PROM defined in the GBIC standard, with the same electrical specifications. The standard SFP serial ID provides identification information describing the transceiver's capabilities, standard interfaces, manufacturer, and other information. The TN-SFP-GE-100FX also provides a Digital Diagnostic Monitoring Interface that allows real-time access to device operating parameters. See the full SFP manual for more details. System Board Layout The OptiPlex 7040 Micro has two M.2 expansion slots: one 22x30 slot (#10 in below diagram) and one 22x80 slot (#13 in below diagram). The NM2-FXS-2230-SFP-01 installs in the 22x30 slot (#10 in below diagram). See the Dell OptiPlex 7040M Owner's Manual for more details. 1. Processor 2. CPU fan connector 3. Internal speaker connector 33730 Rev. D 11. Power switch 12. Hard drive connector 13. M.2 socket3 connector https://www.lantronix.com/ Page 6 of 17