Lantronix UDS2100 UDS2100 - User Guide - Page 30
Connection Settings - TCP, Flush Output Buffer Network to Serial
View all Lantronix UDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4: Configuration Using Web Manager Flush Output Buffer (Network to Serial) With Active Connect Select Yes to clear the output buffer with a connection that is initiated from the device to the network. The default setting is No. With Passive Connect Select Yes to clear the output buffer with a connection initiated from the network to the device. The default setting is No. At Time of Disconnect Select Yes to clear the output buffer when the network connection to or from the device is disconnected. The default setting is No. 3. When you are finished, click the OK button. 4. On the main menu, click Apply Settings. Connection Settings - TCP To configure a channel's TCP settings: 1. On the main menu, click Connection. The Connection Settings window for the channel displays. UDS2100 User Guide 30