Lenovo 9486F2U User Guide - Page 42
Replacing the keyboard, a USB connector
UPC - 884343247014
View all Lenovo 9486F2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Replacing the keyboard Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the keyboard. To replace the keyboard: 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Locate the keyboard connector. Note: Your keyboard might be connected to a PS/2 keyboard connector 1 or a USB connector 2 . Depending on where your keyboard is connected, see "Locating connectors on the rear of your computer" on page 9 or "Locating connectors on the front of your computer" on page 8. Figure 30. Keyboard connectors 3. Disconnect the failing keyboard cable from the computer. 4. Connect a new keyboard to the appropriate connector on the computer. 5. Go to "Completing the parts replacement" on page 35. 34 User Guide