Lenovo A540 Lenovo A540/A740 Hardware Maintenance Manual - Page 41
ReplacingtheTransformboard
View all Lenovo A540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Step 8. Open up the LED panel from the bottom 1 , remove the 2 screws that secure the transform board to the rear cover 2 , and then disconnect the 2 cables from the transform board. 3 Step 9. Then separate the rear cover from the LED panel. Step 10. To reattach the rear cover: a. Line up the LED panel with the rear cover, reconnect the LVDS1 and LVDS2 cables to the transform board. b. Reattach the transform board, and secure it to the rear cover with the 2 screws. c. Line up the LED panel with mounting pins on the rear cover, and then slide it into position. Step 11. Reattach the hinge to the chassis, and reconnect the touch and LED panel cables back to the motherboard. Step 12. Reattach the base cover and secure it with the screws. Replacing the Transform board Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. To replace the transform board Step 1. Step 2. Step 3. Step 4. Step 5. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Unplug all power cords from electrical outlets. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the base cover. Refer to "Removing the base cover". Remove the hinge from the chassis. Refer to "Removing the hinge from the chassis". Chapter 7. Replacing hardware 35