Lenovo Aptiva Hardware Maintenance Manual (HMM) for Aptiva 2173, 2178 and 2179 - Page 16
Diskette drive Cable
View all Lenovo Aptiva manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Diagnostic Error Code 005-197-XXX Video test warning 005-198-XXX Video test aborted 005-199-XXX Video test failed, cause unknown 005-2XX-XXX 005-3XX-XXX Video subsystem error 006-000-XXX Diskette interface Test Passed 006-0XX-XXX Diskette interface error 006-195-XXX Diskette interface Test aborted by user 006-196-XXX Diskette interface test halt, error threshold exceeded 006-197-XXX Diskette interface test warning FRU/Action 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined problem" section. 1. Go to "Undetermined problem" section. 2. Flash the system and re-test 3. Replace component under function test. 1. Video card, if installed 2. System board 1. No action 1. Diskette drive Cable 2. Diskette drive 3. System board 1. Information 2. Re-start the test, if need to 1. Depress F3 to review the log file. 2. Re-start the test to reset the log file. 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 6 IBM PC 300/IntelliStation/Aptiva Vol 2 HMM