Lenovo Aptiva Hardware Maintenance Manual (HMM) for Aptiva 2173, 2178 and 2179 - Page 27
called out is enabled
View all Lenovo Aptiva manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Diagnostic Error Code 086-199-XXX Mouse Port interface test failed, cause unknown 089-000-XXX Microprocessor Test Passed 089-XXX-XXX Microprocessor failure 089-195-XXX Microprocessor Test aborted by user 089-196-XXX Microprocessor test halt, error threshold exceeded 089-197-XXX Microprocessor test warning 089-198-XXX Microprocessor test aborted 089-199-XXX Microprocessor test failed, cause unknown 170-000-XXX Voltage Sensor(s) Test Passed 170-0XX-XXX Voltage Sensor(s) failure 170-195-XXX Voltage Sensor(s) Test aborted by user 170-196-XXX Voltage Sensor(s) test halt, error threshold exceeded FRU/Action 1. Go to "Undetermined problem" section. 2. Flash the system and re-test 3. Replace component under function test. 1. No action 1. Microprocessor(s) 2. System board 1. Information 2. Re-start the test, if need to 1. Depress F3 to review the log file. 2. Re-start the test to reset the log file. 1. Make sure component that is called out is enabled and/or connected 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is enabled and/or connected 2. Flash the system and re-test 3. Go to "Undetermined problem" section. 1. Go to "Undetermined problem" section. 2. Flash the system and re-test 3. Replace component under function test. 1. No action 1. Flash system 2. System board 1. Information 2. Re-start the test, if need to 1. Depress F3 to review the log file. 2. Re-start the test to reset the log file. IBM PC Enhanced Diagnostics error codes 17