Lenovo Aptiva Hardware Maintenance Manual (HMM) for Aptiva 2173, 2178 and 2179 - Page 390

POST Error Code 180X, 188X PCI configuration or resource error. 1962 Boot sequence error. 209X 20XX Not listed above 21XX 2401, 2402 If screen colors change. 2401, 2402 If screen colors are OK. 2409 2410 2462 Video memory configuration error. 3015, 3040 Check for missing wrap or terminator plug on the adapter. 30XX FRU/Action 1. Run Setup and verify PCI/ISA configuration settings. 2. If necessary, set ISA adapters to "Not available" to allow PCI adapters to properly configure. 3. Remove any suspect ISA adapters. 4. Rerun diagnostics. 5. PCI Adapter 1. Possible hard disk drive problem, see "Hard disk drive boot error" on page 339. 1. Diskette Drive 2. Diskette Cable 3. 16-bit AT Fast SCSI Adapter 1. BSC Adapter 1. SCSI Device 2. 16-bit AT Fast SCSI Adapter 3. Alternate BSC Adapter 1. Display 1. System Board 2. Display 1. Display 1. System Board 2. Display 1. Check cable connections. 2. Run Setup and verify video configuration settings. 3. Video Memory Modules 4. Video Adapter (if installed) 5. System Board 1. Network Attached? 2. LF Translator 3. Cable Problem 4. PC Network Adapter 1. PC Network Adapter 2. LF Translator 3. Cable Problem? 380 IBM PC 300/IntelliStation/Aptiva Vol 2 HMM