Lenovo B750 IdeaCentre B750 Hardware Maintenance Manual - Page 37
Push the pins and release the hard disk drive from the bracket.
View all Lenovo B750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Step 3. Step 4. Step 5. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right view" and "Rear view" for help with locating the various connectors. Remove the rear cover. Refer to "Removing the rear cover". Push then slide the hard disk drive and bracket upward and out of the chassis as shown. 1 2 1 2 Step 6. Push the pins and release the hard disk drive from the bracket. Step 7. Remove the two screws that secure the shielding to the hard disk drive, then remove the shielding. Chapter 8. Replacing hardware 31
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4.
Remove the rear cover. Refer to “Removing the rear cover”.
Step 5.
Push then slide the hard disk drive and bracket upward and out of the chassis as shown.
1
2
Step 6.
Push the pins and release the hard disk drive from the bracket.
Step 7.
Remove the two screws that secure the shielding to the hard disk drive, then remove the
shielding.
Chapter 8
.
Replacing hardware
31