Lenovo B750 IdeaCentre B750 Hardware Maintenance Manual - Page 43
Replacing the power switch board, Connect the data cable to the new camera.
View all Lenovo B750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Step 8. Push the two pin to release the camera 1 , then lift the camera out. 2 Step 9. Disconnect the data cable from the camera. 3 Step 10. Push the pins to release the camera out of housing 4 , then lift the camera out. 5 Step 11. To install the new camera: a. Line up the new camera with the housing, then insert b. Connect the data cable to the new camera. c. Line up then insert the new camera and housing into position, and secure the camera with the locking pins. Step 12. Reattach the middle cover, optical drive, computer stand and the rear cover. Replacing the power switch board Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. To replace the power switch board Chapter 8. Replacing hardware 37