Lenovo B750 IdeaCentre B750 Hardware Maintenance Manual - Page 56
Power board cable, Step 16. Remove all the cables connected to the motherboard, including
View all Lenovo B750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Step 16. Remove all the cables connected to the motherboard, including: a. LVDS cables b. Hard disk drive power and SATA cables. c. Optical disk drive power and SATA cables. d. Power supply cables e. Converter cable f. Speaker cable g. Subwoofer cable h. Camera cable i. Power board cable j. Front function board cable k. Front indicator board cable l. B-CAS card cable Step 17. Remove the four screws that secure the motherboard to the chassis and lift up the motherboard as shown. Step 18. To install the new motherboard: a. Line up the motherboard with the chassis, then secure it with the screws. b. Insert the notched end of the TV-Tuner card into the card port on the new motherboard and secure it with the screw. c. Insert the notched end of the Wi-Fi card into the card port on the new motherboard and secure it with the screw. d. Install the CPU to the new motherboard and secure the CPU in the socket, close the CPU retainer and lock it into position with the small handle. e. Install the memory module(s) to the new motherboard. f. Install the heat-sink to the new motherboard. g. Install the system fans to the new motherboard. h. Connect the antenna cable(s) to the TV-Tuner card. i. Connect all the cables to the new motherboard. 50 IdeaCentre B750Hardware Maintenance Manual