Lenovo C100 Lenovo 3000 C100 Hardware Maintenance Manual (Windows 7) - Page 40
Replacing the heat sink and system fan
UPC - 884942560453
View all Lenovo C100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Hardware Maintenance Manual Replacing the heat sink and system fan To replace the heat sink and system fan 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the 7 screws that secure the heat sink and system fan to the system board and LCD panel bracket 1 . 3. Disconnect the system fan cable from the system board 2 . Pull the heat sink and system fan away from the system board. 1 2 4 2 3 1 4. Align the 7 screw holes on the new heat sink and system fan to the 7 mounting holes on the chassis. 5. Insert and tighten the 7 screws to secure the heat sink and system fan. 6. Connect the system fan cable to the system board. 7. Install the computer cover. Refer to "Completing the installation". 38
Hardware Maintenance Manual
38
Replacing the heat sink and system fan
To replace the heat sink and system fan
1.
Remove the computer cover. Refer to “Removing the computer cover”.
2.
Remove the 7 screws that secure the heat sink and system fan to the
system board and LCD panel bracket
1
.
3.
Disconnect the system fan cable from the system board
2
. Pull the
heat sink and system fan away from the system board.
1
2
1
2
3
4
4.
Align the 7 screw holes on the new heat sink and system fan to the 7
mounting holes on the chassis.
5.
Insert and tighten the 7 screws to secure the heat sink and system fan.
6.
Connect the system fan cable to the system board.
7.
Install the computer cover. Refer to ”Completing the installation“.