Lenovo C100 Lenovo 3000 C100 Hardware Maintenance Manual (Windows 7) - Page 42

Replacing the camera/Mic. system

Page 42 highlights

Hardware Maintenance Manual Replacing the camera/Mic. system To replace the camera/Mic. system 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the two screws that secure the camera/Mic. system to the chassis 1 and disconnect one end of the camera cables from the rear of the camera/Mic. system and the other end of the cables from the system board 2 . 1 2 4 2 2 3 1 2 3. Pull the camera/Mic. system away from the chassis. 4. Screw back the two screws on the new camera. 5. Connect the camera cables to the camera and the system board. 6. Install the computer cover. Refer to "Completing the installation". 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

Hardware Maintenance Manual
40
Replacing the camera/Mic. system
To replace the camera/Mic. system
1.
Remove the computer cover. Refer to ”Removing the computer cover“.
2.
Remove the two screws that secure the camera/Mic. system to the
chassis
1
and disconnect one end of the camera cables from the rear
of the camera/Mic. system and the other end of the cables from the
system board
2
.
1
2
3
4
1
2
2
2
3.
Pull the camera/Mic. system away from the chassis.
4.
Screw back the two screws on the new camera.
5.
Connect the camera cables to the camera and the system board.
6.
Install the computer cover. Refer to “Completing the installation“.